升降平台如今是很受大伙儿的热烈欢迎，可以很轻轻松松的把货品送上摩天大楼。在其中油压式升降平台就是说更受大家的喜爱，大家能够依据自身具体情况挑选合适自身的。
Lifting platforms are now very popular with people and can easily deliver goods to skyscrapers. Among them, the oil-pressure lifting platform is more popular, and you can choose the right one according to your own specific conditions.
一、动力单元调整，无论是剪叉式液压升降平台還是滑轨式液压升降货梯，均是由动力单元和液压缸操纵的，动力单元在生产制造时下设4个出孔，是能够调整尺寸的，扩大或减少液压缸齿轮油总流量，我们可以通过调整马达速度或电液比例阀来调整液压油流量；二、油管控制，液压油管越长，上升时间也就越长。因此在安装时，在设计允许范围内要尽可能的减小油管的长度；在调节动力单元的基础上也可以对输油管路大小进行调整，在保证设备达到正常需求an全的前提下，可以进行相应的调整。
First, the adjustment of power unit is controlled by power unit and hydraulic cylinder, whether it is a hydraulic lifting platform with scissors or a sliding rail. The power unit has four outlets in the production and manufacture, which can adjust the size, expand or reduce the total flow of gear oil in the hydraulic cylinder. We can adjust the flow of hydraulic oil by adjusting the speed of motor or electro-hydraulic proportional valve. The longer the hydraulic tubing is, the longer the rising time will be. Therefore, in the installation, the length of oil pipeline should be reduced as much as possible within the allowable range of design; on the basis of adjusting power unit, the size of oil pipeline can also be adjusted, and on the premise of ensuring the safety of equipment to meet normal demand, corresponding adjustments can be made.
三、液压缸操纵，液压缸规格，在考虑设计方案规定的状况下，尽量的减少液压缸规格。液压缸规格越小，升高速率越来越快。
3. Hydraulic cylinder manipulation, hydraulic cylinder specifications, in consideration of the design requirements, as far as possible to reduce the hydraulic cylinder specifications. The smaller the size of hydraulic cylinder, the faster the rising rate.
四、货品的载量，一回运输货品的吨数也危害升降机的速率，超过液压升降平台运输货品的优异值是速率的确保，假如侧重就危害来到速率，假如货升降平台物过轻，也危害来到一切正常运输時间。
4. The load of goods and the tonnage of goods transported once also endanger the speed of the elevator. Exceeding the excellent value of the goods transported by the hydraulic elevating platform is the guarantee of the speed. If the emphasis is on the arrival rate of the hazards, if the goods are too light, it will also endanger all the normal transportation time.
1、液压升降平台液压缸耗损比较严重，内封闭式圈出現毁坏不匀称或是内有阻碍物就非常容易导致支承不匀称，导致液压缸升降机高宽比不匀称，提议认真仔细液压缸是不是一切正常。
1. The hydraulic cylinder of the hydraulic lifting platform is seriously damaged. If the inner closed ring is damaged unevenly or there are obstacles inside, it is very easy to cause the support unevenness and the lift height width ratio of the hydraulic cylinder is unevenly. It is suggested to carefully check whether the hydraulic cylinder is normal.
2、升降平台送油管内部有异物，导致输送液压油造成受力不均匀，会出现台面不均匀情况，建议仔细查看输送油管是否畅通。
2. There are foreign bodies in the oil pipeline of the lifting platform, which cause uneven force and uneven table surface when transporting hydraulic oil. It is suggested that the oil pipeline be carefully checked.
3、升降平台支杆生产尺寸不一致，属于升降平台设备自身的质量缺陷，建议联系生产厂家进行更换，这种情况出现的概率较低。
3. The dimension of the support rod of the lifting platform is inconsistent, which belongs to the quality defect of the lifting platform equipment itself. It is suggested to contact the manufacturer for replacement. The probability of this situation is low.
4、液压升降平台支撑杆正中间传动轴不相同，造成液压升降平台没法一切正常工作中，服务平台接到比较严重毁坏，出現橱柜台面歪斜，请细心查询通常剪式高空作业车原厂以前沒有搞好严苛的歪斜检验，就资金投入了销售市场，造成了很多的事故发生，对于倾斜检测，对于广大的小型企业来讲不是十分在意这一环节的检测，这也是为什么有如此数量之大的升降设备存在这个问题的原因。油缸以及动力单元系统问题，往往是动力不足，以及油缸质量不合格问题，升降平台同样对于企业本身来讲也是非常需要注意的问题。
4. The different transmission shafts in the middle of the support rod of the hydraulic lifting platform make it impossible for the hydraulic lifting platform to work normally. The service platform is severely damaged and the cabinet countertop is skewed. Please check carefully that the original factory of the normal shearing high-altitude working vehicle has not done rigorous skewing inspection before, so the capital has been put into the sales market, which has caused many accidents, and for the skewing. Detection, for the majority of small enterprises, is not very concerned about this link of detection, which is why there is such a large number of lifting equipment exists this problem. The problems of cylinder and power unit system are often the lack of power and the unqualified quality of cylinder. Lifting platform is also a very important issue for enterprises themselves.http://www.tqsjj.com/
